EBAOMS COMPUTER SERVICES

  In this post will study parts of the computer. Computer has two parts such as hardware and software. There are two types of hardware 1.          Input Devices 2.          Output devices 1.          INPUT DEVICES The following are input devices which are used in the computer: 1.          Hard Disk 2.          RAM 3.          Motherboard 4.          DVD-ROM 5.          Power Supply 6.          Floppy Disk 7.          Keyboard 8.          Mouse 1.          HARD DISK This is the storage material used to store and process data in your computer. Hard disk will act as secondary storage because it is store data permanently like operating system folder so you can be able to boot your computer. This device is very important without computer can not boot or store data. 2.          RAM (RANDOM ACCESS MEMORY) This also is acting as primary storage of your computer. Without this device also your computer can not boot or process any data. RAM is very important in you

  To set up scanner in a local network for scan do the following steps to configure it. 1.          Connect your printer to the local network with UTP cable to the network port of the printer 2.          Go to This Pc or My computer and double click to open it as shown in the figure below: 3.          Go to the Home tab and click New Folder as shown below and rename it as scan as shown below: 4.          Then right click the folder scan and go to the properties as shown in the figure below 5.          Then the following dialogue box will appear as shown below and  6.          Then in the tab above the box click sharing as shown below 7.          In the figure above in the Network File and Folder Sharing shown in the dialogue box click share as shown below 8.          After click share the following dialogue box will appear as shown below: 9.          Click to Add users as shown dialogue box above and then after select Everyone and click Add button then select Read/Write as shown an

  To set up printer in a local network for print do the following steps to configure it. 1.          Connect your printer to the local network with UTP cable to the network port of the printer 2.          Go to the control panel in your computer as shown below 3.          Find Hardware and Sound as shown above and click View devices and Printers as shown below: 4.          After click view devices and printer then the dialogue box will appear as shown below then click Add printer  5.          Then the following dialogue box will appear as shown below then click the printer that was not listed as shown 6.          After that the following dialogue box will appear then click using ip address of hostname as shown below and then click Next 7.          In the following dialogue box select TCP/IP and then fill the IP address of your printer as shown below and then click next to proceed with the installation 8.      After choose your printer manufacturer in the list as shown then click Ne